![]() Where can you obtain the initial DSDT that needs to be patched? There are different ways involving Windows, Linux or OS X. Skip this step ONLY if you already have your DSDT extracted: Save these settings and exit the UEFI BIOS setup. RTC Alarm Power On = By OS (this setting doesn't cause system waking on every 2 hours!)ĬSM (Compatibility Support Module) = Disabled Intel Smart Connect Technology = Disabled Make sure the below settings are setup as following:Īdvanced / CPU Configuration : Restart the system and hit F2 to enter the UEFI BIOS setup. I'm posting my initial ist for saving you a time testing Clover settings and avoiding KPs (kernel panics) during the initial boot with Clover.Ĭopy HFSPlus.efi to /EFI/Clover/drivers64UEFI/ and delete VBoxHFS.efi from the same folder (example below):ĭon't remove the USB thumb, it will be used to boot Clover and to install Yosemite. ![]() Overwrite the original ist file located here /EFI/Clover/ist with this ist. Install Clover r2960 (download link at the end of this post) to the USB thumb drive with checked Install for UEFI booting only option:Īfter the successful installation of Clover the EFI folder will be mounted and opened by default.Ĭopy FakeSMC.kext ( mandatory for booting OS X ) to /EFI/Clover/kext/10.10 (manually create the 10.10 folder): The copying process will take up to max 10 - 15 minutes. You'll be asked to enter your password, type it and hit enter. Sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia -volume /Volumes/Install -applicationpath /Applications/Install\ OS\ X\ Yosemite.app -nointeraction ![]() Then open Terminal and paste the following command: Using Disk Utility format the thumb drive with GUID partition mapping and name it "Install" (without the quotes, the name Install is used by the below terminal command). You'll need a 8GB USB thumb drive, the "Install OS X Yosemite.app" (make sure it resides in the /Applications folder). Preparing the USB thumb drive with Yosemite and Clover on a real Mac or Hackintosh: If you don't have access to a real Mac or Hackintosh you can do the preparation procedure on Windows with the help of BootDiskUtilityĢ.1. Wake from Sleep (either via keyboard of mouse) Native CPU Power Management (XCPM mode)ĥ. Thanks to the correct CPU settings in the BIOS (Advanced / CPU Configuration) and some Clover fixes these work flawlessly:ġ. The board doesn't have locked MSR registers in the BIOS and thus the BIOS image doesn't need a PM Patching. Video: Gigabyte nVidia GTX 750 2GB DDR5 RAMĪSRock H97 Pro4 is a wonderful choice for building a working Yosemite Hackintosh. Motherboard: ASRock H97 Pro4 AMI UEFI BIOS v.1.60 This guide is intended to share my experience with the successful Yosemite installation on ASRock H97 Pro4 using Clover UEFI boot.Ģ.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |